Processingenjör - Lediga jobb

At NKT in Karlskrona, we develop and manufacture high voltage power cables that enable the transition to renewable energy. Here, you will be part of an international engineering centre with advanced high voltage test halls, modern cable production and the cable laying vessel NKT Victoria. As Connectors, we collaborate to develop innovative technology that connects a greener and more sustainable world. NKT is headquartered in Denmark and operates in more than 30 countries.NKT - We connect a greener world. www.NKT.com.

Drift, projektering och optimering av process- och ventilations- och rörsystem

Arbeta med tekniska lösningar inom process- ventilation- och rörsystem i en industriell miljö. I denna roll bidrar du till systemdesign, beräkningar och projektkoordinering med tydligt fokus på säkerhet och efterlevnad av regelverk. Tjänsten passar dig med bakgrund inom drift- process- eller VVS-teknik eller motsvarande erfarenhet som trivs med strukturerat arbete, noggrann dokumentation och samarbete mellan tekniska områden.I rollen arbetar du med projektering av process- rör- och ventilationssystem och säkerställer att lösningarna uppfyller både driftkrav och gällande regelverk.

Arbetsuppgifterna omfattar tryck- och flödesberäkningar samt arbete med processoptimering i industriella verksamheter.Du tolkar och använder tekniska ritningar och scheman i både planering och genomförande. Rollen innefattar även projektledning, där du ansvarar för tidsplaner, resurser och uppföljning. Vid behov medverkar du också i arbetsledning på plats.Arbetet sker i enlighet med regelverk kring trycksatta anordningar och relevanta branschstandarder. Du använder CAD-verktyg i projekteringsarbetet samt Microsoft-program för dokumentation och kommunikation.

•    Vi söker dig som har utbildning som Driftingenjör, VVS-ingenjör eller Processingenjör alternativt motsvarande erfarenhet, gärna med bakgrund från industrin.•    Du har kunskap om regelverk kring trycksatta anordningar och är bekant med branschspecifika standarder.•    Erfarenhet av projekteringsverktyg som CAD är meriterande, liksom förmåga att läsa ritningar och scheman. •    God datorvana, särskilt inom Microsofts program, är nödvändig. 

Som person arbetar du strukturerat och lösningsorienterat, med hög noggrannhet och fokus på säkerhet. Du analyserar situationer och fattar välgrundade beslut, både självständigt och i samarbete med andra. Vi välkomnar ansökningar från personer med olika bakgrunder, erfarenheter och perspektiv, inklusive personer med funktionsnedsättning.

Är du en erfaren projektledare inom el som trivs med att ta ansvar och driva projekt framåt? Då kan detta vara möjligheten för dig! Lambertsson söker nu en projektledare inom el till Luleå. I rollen ansvarar du för att planera, leda och följa upp elentreprenaden samt säkerställa hög kvalitet, god samordning och ett starkt fokus på elsäkerhet genom hela projektet.

Information om företaget

Lambertsson är en av Skandinaviens största uthyrare och tjänsteleverantörer inom bygg- och industrilösningar. Vi erbjuder totallösningar samt tjänster inom uthyrning, tillfällig-el, kranar, moduler och trafikanordningar. Lambertsson är ett dotterbolag inom Peabkoncernen. 

Deras kärnvärden jordnära, utvecklande, personliga och pålitliga är en naturlig del av vardagen, och vi söker dig som känner igen dig i dessa och vill arbeta utifrån dem. Hos Lambertsson finns stora möjligheter till personlig utveckling.

Information om tjänsten

Professionals Nord söker för Lambertssons räkning en Projektledare inom El. Tjänsten är en direktrekrytering vilket innebär att rekryteringsprocessen sker genom Professionals Nord och att du anställs direkt hos Lambertsson.

Den här rekryteringsprocessen hanteras av Professionals Nord och Lambertssons önskemål är att alla frågor kring tjänsten går till ellen.soderholm@pn.se (mailto:ellen.soderholm@pn.se).

Du erbjuds

• En nyckelroll i ett av Sveriges största bygg- och industriprojekt
• Ett långsiktigt projekt som sträcker sig över flera år
• Möjlighet att påverka och utveckla arbetssätt
• Ett engagerat team med hög teknisk kompetens
• En varierad roll med många kontaktytor och nära samarbete med både kollegor, kunder och entreprenörer

Som en del av Lambertsson blir du även en del av PEAB-koncernen, en av Nordens ledande samhällsbyggare. Här får du möjlighet att bidra till utvecklingen av framtidens hållbara samhälle genom projekt som gör verklig skillnad.

Arbetsuppgifter

Som Projektledare ansvarar du för planering, samordning och genomförande av elentreprenaden i ett av de största tillfälliga byggprojekten som genomförs i Sverige. Projektet kommer att pågå under flera år och du blir en viktig del i uppbyggnaden och driften av den tillfälliga elanläggningen.

En central del av rollen är att axla ansvaret som eldriftledare för den tillfälliga elen på arbetsplatsen. Rollen innebär ett stort säkerhetsansvar och kräver att du känner dig trygg med att fatta beslut kring elsäkerhet och drift. Du arbetar nära elektriker, projektledare, kunder, leverantörer och övriga entreprenörer.

Exempel på arbetsuppgifter:

• Planera, leda och följa upp elentreprenaden
• Ansvara för eldriftsansvaret för den tillfälliga elanläggningen
• Utföra elberäkningar och säkerställa tekniska lösningar
• Ansvara för projektets budget, prognoser och fakturering
• Delta i bygg- och samordningsmöten

• Säkerställa att arbetet bedrivs enligt ESA (Elsäkerhetsanvisningarna)

Vi söker dig som har:

• Erfarenhet av projektledning inom el
• Gymnasial utbildning inom el- och energi, eller annan likvärdig utbildning
• Kunskap inom låg- och högspänningsanläggningar
• Erfarenhet av att planera och projektera elanläggningar
• God kännedom om ESA och arbete enligt elsäkerhetsföreskrifter
• Talar och skriver obehindrat på svenska och engelska
• B-körkort

Det är meriterande om du har erfarenhet som eldriftledare, är utbildad elkraftsingenjör eller innehar elauktorisation. Vi ser även positivt på om du har BAS-P/BAS-U samt erfarenhet av dimensioneringsverktyget EL-VIS.

För att lyckas i rollen tror vi att du är en initiativtagande och lösningsorienterad person som trivs med att ta ansvar och driva arbetet framåt. Du arbetar strukturerat och noggrant, har ett högt säkerhetsmedvetande och fattar välgrundade beslut även i komplexa situationer. Vidare är du kommunikativ och relationsskapande med en god samarbetsförmåga, och du bidrar med en positiv inställning som stärker teamet och skapar goda relationer med både kollegor och kunder.

START: Enligt överenskommelse

OMFATTNING: Heltid

STAD: Luleå

URVAL: Sker löpande

KONTAKT: Ellen Söderholm

Sök tjänsten genom att klicka på "sök jobbet" nedan. Vi går igenom urvalet löpande och kan därför ha gått vidare med kandidater innan annonsen stängs ner. Om du vill kan du även skapa en användare och ladda upp ditt CV och personliga brev. Vi tar tyvärr inte emot ansökningar via mail men har du frågor kring tjänsten är du välkommen att kontakta oss på ellen.soderholm@pn.se (mailto:ellen.soderholm@pn.se).

#lambertsson #projektledning #el #elektronik #byggbranschen 

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. 

About the Role: 

ESS is at an exciting turning point, transitioning from a construction site to an operating facility. To help us achieve our goal of becoming the world’s most powerful neutron source, we are seeking a Process Engineer for the Plant & Process Engineering Function, part of the Design & Engineering Division. 

The team is responsible for maintaining state-of-the-art process activities across ESS. The group will first specify and design process systems such as cooling systems, instrument air and deionized water distribution, in accordance with PED, European harmonized codes, ESS rules and AFS regulations. They will then design the associated piping systems and mechanical supports to prepare for manufacturing, purchasing and installation phases. Finally, the group will help finalize the as-built documentation. Additional tasks include configuring and supporting the AVEVA tool suite, providing engineering review support, and offering technical advice. 

Day-to-Day you will: 

• Perform system/project preliminary design based on design descriptions and requirements:  
• Prepare specifications and reports, 
• Review design projects, 
• Prepare for and present at preliminary design reviews. 
• Participate in critical process reviews, 
• Document design and group development:  
• Write and/or review process quality requirements, 
• Write and/or review processing licensing requirements, 
• Support standardization activities (components, best practices, and attributes), 
• Propose and implement improvements to procedures, best practices, and policies. 
• Follow up on post-design stages:  
• Support manufacturing phases, 
• Support installation and testing of equipment, 
• Support as-built activities, 
• Stay current with state-of-the-art technology. 

This is a full-time/permanent position based at the brand new https://www.youtube.com/watch?v=d5h4bIEfM5Q.

About you: 

Required: 

• Higher vocational education or university degree in engineering (e.g. a bachelor’s degree), or an equivalent combination of education and experience, 
• Knowledge of components and system dimensioning for requirement and system/function descriptions, 
• Proficiency in the AVEVA tool suite, 
• Proficiency in written and spoken English. 

Desirable: 

• Knowledge of normative constrained environments, 
• Knowledge of EN harmonized codes, preferably EN 13445 and EN 13480, 
• Knowledge of the Pressurized Equipment Directive (PED), 
• Knowledge of fluid distribution system installation. 

We’re looking for someone who is self-motivated, has a problem-solving mindset, is structured, takes responsibility, and adheres to instructions and procedures. 

To apply: 

A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. 

If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is 2026-07-26. 

For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on mailto:sofie.berg@ess.eu or Hiring Manager Xavier Roy on mailto:xavier.roy@ess.eu Due to summer vacations questions will be answered after last application day, and first interviews will be conducted during week 34.  

This role requires enhanced security screening processes which will be performed during the recruitment and onboarding processes. For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careers  

For trade union information, please contact Unionen representative Nerusha Naicker on mailto:Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:Marc.Kickulies@ess.eu 

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. 

About the Role: 

ESS is at an exciting turning point, transitioning from a construction site to an operating facility. To help us achieve our goal of becoming the world’s most powerful neutron source, we are seeking a Process Engineer for the Plant & Process Engineering Function, part of the Design & Engineering Division. 

The team is responsible for maintaining state-of-the-art process activities across ESS. The group will first specify and design process systems such as cooling systems, instrument air and deionized water distribution, in accordance with PED, European harmonized codes, ESS rules and AFS regulations. They will then design the associated piping systems and mechanical supports to prepare for manufacturing, purchasing and installation phases. Finally, the group will help finalize the as-built documentation. Additional tasks include configuring and supporting the AVEVA tool suite, providing engineering review support, and offering technical advice. 

Day-to-Day you will: 

• Perform system/project preliminary design based on design descriptions and requirements:  
• Prepare specifications and reports, 
• Review design projects, 
• Prepare for and present at preliminary design reviews. 
• Participate in critical process reviews, 
• Document design and group development:  
• Write and/or review process quality requirements, 
• Write and/or review processing licensing requirements, 
• Support standardization activities (components, best practices, and attributes), 
• Propose and implement improvements to procedures, best practices, and policies. 
• Follow up on post-design stages:  
• Support manufacturing phases, 
• Support installation and testing of equipment, 
• Support as-built activities, 
• Stay current with state-of-the-art technology. 

This is a full-time/permanent position based at the brand new https://www.youtube.com/watch?v=d5h4bIEfM5Q.

About you: 

Required: 

• Higher vocational education or university degree in engineering (e.g. a bachelor’s degree), or an equivalent combination of education and experience, 
• Knowledge of components and system dimensioning for requirement and system/function descriptions, 
• Proficiency in the AVEVA tool suite, 
• Proficiency in written and spoken English. 

Desirable: 

• Knowledge of normative constrained environments, 
• Knowledge of EN harmonized codes, preferably EN 13445 and EN 13480, 
• Knowledge of the Pressurized Equipment Directive (PED), 
• Knowledge of fluid distribution system installation. 

We’re looking for someone who is self-motivated, has a problem-solving mindset, is structured, takes responsibility, and adheres to instructions and procedures. 

To apply: 

A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. 

If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is 2026-07-26. 

For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on mailto:sofie.berg@ess.eu or Hiring Manager Xavier Roy on mailto:xavier.roy@ess.eu Due to summer vacations questions will be answered after last application day, and first interviews will be conducted during week 34.  

This role requires enhanced security screening processes which will be performed during the recruitment and onboarding processes. For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careers  

For trade union information, please contact Unionen representative Nerusha Naicker on mailto:Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:Marc.Kickulies@ess.eu 

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. 

About the Role: 

ESS is at an exciting turning point, transitioning from a construction site to an operating facility. To help us achieve our goal of becoming the world’s most powerful neutron source, we are seeking a Process Engineer for the Plant & Process Engineering Function, part of the Design & Engineering Division. 

The team is responsible for maintaining state-of-the-art process activities across ESS. The group will first specify and design process systems such as cooling systems, instrument air and deionized water distribution, in accordance with PED, European harmonized codes, ESS rules and AFS regulations. They will then design the associated piping systems and mechanical supports to prepare for manufacturing, purchasing and installation phases. Finally, the group will help finalize the as-built documentation. Additional tasks include configuring and supporting the AVEVA tool suite, providing engineering review support, and offering technical advice. 

Day-to-Day you will: 

• Perform system/project preliminary design based on design descriptions and requirements:  
• Prepare specifications and reports, 
• Review design projects, 
• Prepare for and present at preliminary design reviews. 
• Participate in critical process reviews, 
• Document design and group development:  
• Write and/or review process quality requirements, 
• Write and/or review processing licensing requirements, 
• Support standardization activities (components, best practices, and attributes), 
• Propose and implement improvements to procedures, best practices, and policies. 
• Follow up on post-design stages:  
• Support manufacturing phases, 
• Support installation and testing of equipment, 
• Support as-built activities, 
• Stay current with state-of-the-art technology. 

This is a full-time/permanent position based at the brand new https://www.youtube.com/watch?v=d5h4bIEfM5Q.

About you: 

Required: 

• Higher vocational education or university degree in engineering (e.g. a bachelor’s degree), or an equivalent combination of education and experience, 
• Knowledge of components and system dimensioning for requirement and system/function descriptions, 
• Proficiency in the AVEVA tool suite, 
• Proficiency in written and spoken English. 

Desirable: 

• Knowledge of normative constrained environments, 
• Knowledge of EN harmonized codes, preferably EN 13445 and EN 13480, 
• Knowledge of the Pressurized Equipment Directive (PED), 
• Knowledge of fluid distribution system installation. 

We’re looking for someone who is self-motivated, has a problem-solving mindset, is structured, takes responsibility, and adheres to instructions and procedures. 

To apply: 

A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. 

If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is 2026-07-26. 

For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on mailto:sofie.berg@ess.eu or Hiring Manager Xavier Roy on mailto:xavier.roy@ess.eu Due to summer vacations questions will be answered after last application day, and first interviews will be conducted during week 34.  

This role requires enhanced security screening processes which will be performed during the recruitment and onboarding processes. For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careers  

For trade union information, please contact Unionen representative Nerusha Naicker on mailto:Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:Marc.Kickulies@ess.eu 

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. 

About the Role: 

ESS is at an exciting turning point, transitioning from a construction site to an operating facility. To help us achieve our goal of becoming the world’s most powerful neutron source, we are seeking a Process Engineer for the Plant & Process Engineering Function, part of the Design & Engineering Division. 

The team is responsible for maintaining state-of-the-art process activities across ESS. The group will first specify and design process systems such as cooling systems, instrument air and deionized water distribution, in accordance with PED, European harmonized codes, ESS rules and AFS regulations. They will then design the associated piping systems and mechanical supports to prepare for manufacturing, purchasing and installation phases. Finally, the group will help finalize the as-built documentation. Additional tasks include configuring and supporting the AVEVA tool suite, providing engineering review support, and offering technical advice. 

Day-to-Day you will: 

• Perform system/project preliminary design based on design descriptions and requirements:  
• Prepare specifications and reports, 
• Review design projects, 
• Prepare for and present at preliminary design reviews. 
• Participate in critical process reviews, 
• Document design and group development:  
• Write and/or review process quality requirements, 
• Write and/or review processing licensing requirements, 
• Support standardization activities (components, best practices, and attributes), 
• Propose and implement improvements to procedures, best practices, and policies. 
• Follow up on post-design stages:  
• Support manufacturing phases, 
• Support installation and testing of equipment, 
• Support as-built activities, 
• Stay current with state-of-the-art technology. 

This is a full-time/permanent position based at the brand new https://www.youtube.com/watch?v=d5h4bIEfM5Q.

About you: 

Required: 

• Higher vocational education or university degree in engineering (e.g. a bachelor’s degree), or an equivalent combination of education and experience, 
• Knowledge of components and system dimensioning for requirement and system/function descriptions, 
• Proficiency in the AVEVA tool suite, 
• Proficiency in written and spoken English. 

Desirable: 

• Knowledge of normative constrained environments, 
• Knowledge of EN harmonized codes, preferably EN 13445 and EN 13480, 
• Knowledge of the Pressurized Equipment Directive (PED), 
• Knowledge of fluid distribution system installation. 

We’re looking for someone who is self-motivated, has a problem-solving mindset, is structured, takes responsibility, and adheres to instructions and procedures. 

To apply: 

A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. 

If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is 2026-07-26. 

For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on mailto:sofie.berg@ess.eu or Hiring Manager Xavier Roy on mailto:xavier.roy@ess.eu Due to summer vacations questions will be answered after last application day, and first interviews will be conducted during week 34.  

This role requires enhanced security screening processes which will be performed during the recruitment and onboarding processes. For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careers  

For trade union information, please contact Unionen representative Nerusha Naicker on mailto:Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:Marc.Kickulies@ess.eu 

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. 

About the Role: 

ESS is at an exciting turning point, transitioning from a construction site to an operating facility. To help us achieve our goal of becoming the world’s most powerful neutron source, we are seeking a Process Engineer for the Plant & Process Engineering Function, part of the Design & Engineering Division. 

The team is responsible for maintaining state-of-the-art process activities across ESS. The group will first specify and design process systems such as cooling systems, instrument air and deionized water distribution, in accordance with PED, European harmonized codes, ESS rules and AFS regulations. They will then design the associated piping systems and mechanical supports to prepare for manufacturing, purchasing and installation phases. Finally, the group will help finalize the as-built documentation. Additional tasks include configuring and supporting the AVEVA tool suite, providing engineering review support, and offering technical advice. 

Day-to-Day you will: 

• Perform system/project preliminary design based on design descriptions and requirements:  
• Prepare specifications and reports, 
• Review design projects, 
• Prepare for and present at preliminary design reviews. 
• Participate in critical process reviews, 
• Document design and group development:  
• Write and/or review process quality requirements, 
• Write and/or review processing licensing requirements, 
• Support standardization activities (components, best practices, and attributes), 
• Propose and implement improvements to procedures, best practices, and policies. 
• Follow up on post-design stages:  
• Support manufacturing phases, 
• Support installation and testing of equipment, 
• Support as-built activities, 
• Stay current with state-of-the-art technology. 

This is a full-time/permanent position based at the brand new https://www.youtube.com/watch?v=d5h4bIEfM5Q.

About you: 

Required: 

• Higher vocational education or university degree in engineering (e.g. a bachelor’s degree), or an equivalent combination of education and experience, 
• Knowledge of components and system dimensioning for requirement and system/function descriptions, 
• Proficiency in the AVEVA tool suite, 
• Proficiency in written and spoken English. 

Desirable: 

• Knowledge of normative constrained environments, 
• Knowledge of EN harmonized codes, preferably EN 13445 and EN 13480, 
• Knowledge of the Pressurized Equipment Directive (PED), 
• Knowledge of fluid distribution system installation. 

We’re looking for someone who is self-motivated, has a problem-solving mindset, is structured, takes responsibility, and adheres to instructions and procedures. 

To apply: 

A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. 

If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is 2026-07-26. 

For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on mailto:sofie.berg@ess.eu or Hiring Manager Xavier Roy on mailto:xavier.roy@ess.eu Due to summer vacations questions will be answered after last application day, and first interviews will be conducted during week 34.  

This role requires enhanced security screening processes which will be performed during the recruitment and onboarding processes. For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careers  

For trade union information, please contact Unionen representative Nerusha Naicker on mailto:Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:Marc.Kickulies@ess.eu 

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. 

About the Role: 

ESS is at an exciting turning point, transitioning from a construction site to an operating facility. To help us achieve our goal of becoming the world’s most powerful neutron source, we are seeking a Process Engineer for the Plant & Process Engineering Function, part of the Design & Engineering Division. 

The team is responsible for maintaining state-of-the-art process activities across ESS. The group will first specify and design process systems such as cooling systems, instrument air and deionized water distribution, in accordance with PED, European harmonized codes, ESS rules and AFS regulations. They will then design the associated piping systems and mechanical supports to prepare for manufacturing, purchasing and installation phases. Finally, the group will help finalize the as-built documentation. Additional tasks include configuring and supporting the AVEVA tool suite, providing engineering review support, and offering technical advice. 

Day-to-Day you will: 

• Perform system/project preliminary design based on design descriptions and requirements:  
• Prepare specifications and reports, 
• Review design projects, 
• Prepare for and present at preliminary design reviews. 
• Participate in critical process reviews, 
• Document design and group development:  
• Write and/or review process quality requirements, 
• Write and/or review processing licensing requirements, 
• Support standardization activities (components, best practices, and attributes), 
• Propose and implement improvements to procedures, best practices, and policies. 
• Follow up on post-design stages:  
• Support manufacturing phases, 
• Support installation and testing of equipment, 
• Support as-built activities, 
• Stay current with state-of-the-art technology. 

This is a full-time/permanent position based at the brand new https://www.youtube.com/watch?v=d5h4bIEfM5Q.

About you: 

Required: 

• Higher vocational education or university degree in engineering (e.g. a bachelor’s degree), or an equivalent combination of education and experience, 
• Knowledge of components and system dimensioning for requirement and system/function descriptions, 
• Proficiency in the AVEVA tool suite, 
• Proficiency in written and spoken English. 

Desirable: 

• Knowledge of normative constrained environments, 
• Knowledge of EN harmonized codes, preferably EN 13445 and EN 13480, 
• Knowledge of the Pressurized Equipment Directive (PED), 
• Knowledge of fluid distribution system installation. 

We’re looking for someone who is self-motivated, has a problem-solving mindset, is structured, takes responsibility, and adheres to instructions and procedures. 

To apply: 

A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. 

If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is 2026-07-26. 

For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on mailto:sofie.berg@ess.eu or Hiring Manager Xavier Roy on mailto:xavier.roy@ess.eu Due to summer vacations questions will be answered after last application day, and first interviews will be conducted during week 34.  

This role requires enhanced security screening processes which will be performed during the recruitment and onboarding processes. For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careers  

For trade union information, please contact Unionen representative Nerusha Naicker on mailto:Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:Marc.Kickulies@ess.eu 

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. 

About the Role: 

ESS is at an exciting turning point, transitioning from a construction site to an operating facility. To help us achieve our goal of becoming the world’s most powerful neutron source, we are seeking a Process Engineer for the Plant & Process Engineering Function, part of the Design & Engineering Division. 

The team is responsible for maintaining state-of-the-art process activities across ESS. The group will first specify and design process systems such as cooling systems, instrument air and deionized water distribution, in accordance with PED, European harmonized codes, ESS rules and AFS regulations. They will then design the associated piping systems and mechanical supports to prepare for manufacturing, purchasing and installation phases. Finally, the group will help finalize the as-built documentation. Additional tasks include configuring and supporting the AVEVA tool suite, providing engineering review support, and offering technical advice. 

Day-to-Day you will: 

• Perform system/project preliminary design based on design descriptions and requirements:  
• Prepare specifications and reports, 
• Review design projects, 
• Prepare for and present at preliminary design reviews. 
• Participate in critical process reviews, 
• Document design and group development:  
• Write and/or review process quality requirements, 
• Write and/or review processing licensing requirements, 
• Support standardization activities (components, best practices, and attributes), 
• Propose and implement improvements to procedures, best practices, and policies. 
• Follow up on post-design stages:  
• Support manufacturing phases, 
• Support installation and testing of equipment, 
• Support as-built activities, 
• Stay current with state-of-the-art technology. 

This is a full-time/permanent position based at the brand new https://www.youtube.com/watch?v=d5h4bIEfM5Q.

About you: 

Required: 

• Higher vocational education or university degree in engineering (e.g. a bachelor’s degree), or an equivalent combination of education and experience, 
• Knowledge of components and system dimensioning for requirement and system/function descriptions, 
• Proficiency in the AVEVA tool suite, 
• Proficiency in written and spoken English. 

Desirable: 

• Knowledge of normative constrained environments, 
• Knowledge of EN harmonized codes, preferably EN 13445 and EN 13480, 
• Knowledge of the Pressurized Equipment Directive (PED), 
• Knowledge of fluid distribution system installation. 

We’re looking for someone who is self-motivated, has a problem-solving mindset, is structured, takes responsibility, and adheres to instructions and procedures. 

To apply: 

A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. 

If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is 2026-07-26. 

For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on mailto:sofie.berg@ess.eu or Hiring Manager Xavier Roy on mailto:xavier.roy@ess.eu Due to summer vacations questions will be answered after last application day, and first interviews will be conducted during week 34.  

This role requires enhanced security screening processes which will be performed during the recruitment and onboarding processes. For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careers  

For trade union information, please contact Unionen representative Nerusha Naicker on mailto:Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:Marc.Kickulies@ess.eu 

The European Spallation Source (ESS) will soon be the world’s most powerful source of neutrons, providing researchers with unique opportunities to explore the structure of materials at the atomic level. Neutron scattering at ESS will address critical questions in physics, chemistry, geology, materials science and life science. 

About the Role: 

ESS is at an exciting turning point, transitioning from a construction site to an operating facility. To help us achieve our goal of becoming the world’s most powerful neutron source, we are seeking a Process Engineer for the Plant & Process Engineering Function, part of the Design & Engineering Division. 

The team is responsible for maintaining state-of-the-art process activities across ESS. The group will first specify and design process systems such as cooling systems, instrument air and deionized water distribution, in accordance with PED, European harmonized codes, ESS rules and AFS regulations. They will then design the associated piping systems and mechanical supports to prepare for manufacturing, purchasing and installation phases. Finally, the group will help finalize the as-built documentation. Additional tasks include configuring and supporting the AVEVA tool suite, providing engineering review support, and offering technical advice. 

Day-to-Day you will: 

• Perform system/project preliminary design based on design descriptions and requirements:  
• Prepare specifications and reports, 
• Review design projects, 
• Prepare for and present at preliminary design reviews. 
• Participate in critical process reviews, 
• Document design and group development:  
• Write and/or review process quality requirements, 
• Write and/or review processing licensing requirements, 
• Support standardization activities (components, best practices, and attributes), 
• Propose and implement improvements to procedures, best practices, and policies. 
• Follow up on post-design stages:  
• Support manufacturing phases, 
• Support installation and testing of equipment, 
• Support as-built activities, 
• Stay current with state-of-the-art technology. 

This is a full-time/permanent position based at the brand new https://www.youtube.com/watch?v=d5h4bIEfM5Q.

About you: 

Required: 

• Higher vocational education or university degree in engineering (e.g. a bachelor’s degree), or an equivalent combination of education and experience, 
• Knowledge of components and system dimensioning for requirement and system/function descriptions, 
• Proficiency in the AVEVA tool suite, 
• Proficiency in written and spoken English. 

Desirable: 

• Knowledge of normative constrained environments, 
• Knowledge of EN harmonized codes, preferably EN 13445 and EN 13480, 
• Knowledge of the Pressurized Equipment Directive (PED), 
• Knowledge of fluid distribution system installation. 

We’re looking for someone who is self-motivated, has a problem-solving mindset, is structured, takes responsibility, and adheres to instructions and procedures. 

To apply: 

A career at ESS gives you the opportunity to contribute to the future discoveries within neutron science at a stunning, brand-new workplace filled with innovative minds and brilliant people from across the globe. We offer market competitive, individualised compensation which is differentiated according to role, responsibilities, individual skills, abilities and achievements as well as monthly pension contributions on top of your salary. 

If you see yourself in what we’re looking for, please provide your CV and motivation letter in English by clicking on “apply” and following the instructions. Please be aware that we can only accept direct applications made via the ESS website, so submit your application as soon as you can. The last date for receiving applications is 2026-07-26. 

For further information regarding the position, please contact Talent Acquisition Specialist Sofie Berg on mailto:sofie.berg@ess.eu or Hiring Manager Xavier Roy on mailto:xavier.roy@ess.eu Due to summer vacations questions will be answered after last application day, and first interviews will be conducted during week 34.  

This role requires enhanced security screening processes which will be performed during the recruitment and onboarding processes. For more information regarding the ESS recruitment process in general, please follow this link: https://europeanspallationsource.se/careers  

For trade union information, please contact Unionen representative Nerusha Naicker on mailto:Nerusha.Naicker@ess.eu or SACO/Swedish Association of Graduate Engineers representative Marc Kickulies at mailto:Marc.Kickulies@ess.eu