Ingenjör i elektroteknik - Lediga jobb

Vi söker nu en Automation Engineer till ett spännande uppdrag där du får arbeta med avancerade automationslösningar inom elkraft, industriella nätverk och kritiska anläggningar. Här får du möjlighet att vara med genom hela projektcykeln, från design och utveckling till installation, testning och driftsättning.

I rollen som Automation Engineer får du ett stort tekniskt ansvar och arbetar nära projektledare, kunder och andra tekniska specialister för att säkerställa att lösningarna håller hög kvalitet och levereras enligt kundens krav.

Du kommer att arbeta med PLC-, HMI- och SCADA-system i kombination med modern utrustning för elkraft och automation. Projekten varierar i storlek och komplexitet, från mindre installationer till större leveranser inom exempelvis datacenter, ställverk och kraftdistributionsanläggningar.

• Ansvara för de tekniska delarna av automationsprojekt från start till färdig leverans
• Programmera och driftsätta PLC-, HMI- och SCADA-system
• Konfigurera och driftsätta industriella nätverk, gateways och kommunikationslösningar
• Installera, konfigurera, testa och driftsätta kundutrustning
• Arbeta med ställverk, reläskydd, mätutrustning, UPS-anläggningar och reservkraftslösningar
• Utföra arbete ute hos kund i driftkritiska miljöer
• Samarbeta med kunder för att förstå behov och omsätta dessa till effektiva tekniska lösningar
• Säkerställa hög kvalitet genom hela projektets livscykel

Här får du en roll där du kombinerar praktiskt ingenjörsarbete med teknisk problemlösning och kundnära samarbete.

• Har en relevant utbildning inom elkraft, automation, mekatronik, datateknik, IT eller motsvarande
• Har erfarenhet av PLC-programmering
• Har arbetat med HMI- och SCADA-system
• Har kunskap inom kraftdistribution och industriella automationslösningar
• Är bekväm med teknisk felsökning och driftsättning
• Kommunicerar obehindrat på både svenska och engelska

• Erfarenhet av industriella Ethernet-nätverk
• Kunskap inom Modbus eller Modbus TCP
• Erfarenhet av IEC 61850
• Erfarenhet av IEC 60870-5-104
• Erfarenhet av DNP3
• Erfarenhet av ställverk och reläskydd
• Erfarenhet av UPS- och reservkraftssystem
• Erfarenhet av arbete i datacenter- eller energimiljöer

• Teknisk nyfiken och har ett starkt intresse för ny teknik
• Lösningsorienterad och drivs av att lösa komplexa problem
• Självgående och tar ansvar för ditt arbete
• Strukturerad och kvalitetsmedveten
• En lagspelare som uppskattar samarbete
• Kommunikativ och van vid dialog med kunder och andra intressenter

• Omfattning: Heltid
• Start: Enligt överenskommelse
• Placering: Skara
• Hybrid

Vi tror på att du ska få växa i den riktning som passar dig. Därför erbjuder vi kontinuerlig kompetensutveckling, certifieringsmöjligheter och tillgång till moderna verktyg och tekniker. Du blir anställd hos Experis och arbetar i uppdrag som matchar dina ambitioner, din erfarenhet och dina mål.

Som konsult hos oss får du stöd av en personlig konsultchef, tillgång till vår AI-drivna plattform Experis Career Accelerator med över 4 500 utbildningar och certifieringar samt möjligheten att bygga en långsiktig karriär inom teknik, automation och digitalisering.

Experis är ett ledande globalt konsultbolag inom IT, Tech och Engineering med över 600 konsulter i Sverige och 22 000 världen över. Vi arbetar långsiktigt med kompetensutveckling, innovation och hållbarhet där våra värderingar People, Knowledge och Innovation genomsyrar allt vi gör.

Vi erbjuder:

• Provanställning enligt kollektivavtal
• Marknadsmässig månadslön
• Tjänstepension och försäkringar
• Friskvårdsbidrag
• Reglerad semester och semesterersättning
• Kontinuerlig kompetensutveckling och certifieringsmöjligheter
• Spännande uppdrag hos attraktiva kunder
• Möjlighet att arbeta med framtidens energi- och automationslösningar Ansökan

  Låter detta som ett uppdrag för dig? Skicka in din ansökan redan idag då urval och intervjuer sker löpande.

  Vid frågor, kontakta:

  Daniel Jordacijevic Talent Acquisition Specialist, Experis daniel.jordacijevic@se.experis.com

Vi söker nu en Automation Engineer till ett spännande uppdrag där du får arbeta med avancerade automationslösningar inom elkraft, industriella nätverk och kritiska anläggningar. Här får du möjlighet att vara med genom hela projektcykeln, från design och utveckling till installation, testning och driftsättning.

I rollen som Automation Engineer får du ett stort tekniskt ansvar och arbetar nära projektledare, kunder och andra tekniska specialister för att säkerställa att lösningarna håller hög kvalitet och levereras enligt kundens krav.

Du kommer att arbeta med PLC-, HMI- och SCADA-system i kombination med modern utrustning för elkraft och automation. Projekten varierar i storlek och komplexitet, från mindre installationer till större leveranser inom exempelvis datacenter, ställverk och kraftdistributionsanläggningar.

• Ansvara för de tekniska delarna av automationsprojekt från start till färdig leverans
• Programmera och driftsätta PLC-, HMI- och SCADA-system
• Konfigurera och driftsätta industriella nätverk, gateways och kommunikationslösningar
• Installera, konfigurera, testa och driftsätta kundutrustning
• Arbeta med ställverk, reläskydd, mätutrustning, UPS-anläggningar och reservkraftslösningar
• Utföra arbete ute hos kund i driftkritiska miljöer
• Samarbeta med kunder för att förstå behov och omsätta dessa till effektiva tekniska lösningar
• Säkerställa hög kvalitet genom hela projektets livscykel

Här får du en roll där du kombinerar praktiskt ingenjörsarbete med teknisk problemlösning och kundnära samarbete.

• Har en relevant utbildning inom elkraft, automation, mekatronik, datateknik, IT eller motsvarande
• Har erfarenhet av PLC-programmering
• Har arbetat med HMI- och SCADA-system
• Har kunskap inom kraftdistribution och industriella automationslösningar
• Är bekväm med teknisk felsökning och driftsättning
• Kommunicerar obehindrat på både svenska och engelska

• Erfarenhet av industriella Ethernet-nätverk
• Kunskap inom Modbus eller Modbus TCP
• Erfarenhet av IEC 61850
• Erfarenhet av IEC 60870-5-104
• Erfarenhet av DNP3
• Erfarenhet av ställverk och reläskydd
• Erfarenhet av UPS- och reservkraftssystem
• Erfarenhet av arbete i datacenter- eller energimiljöer

• Teknisk nyfiken och har ett starkt intresse för ny teknik
• Lösningsorienterad och drivs av att lösa komplexa problem
• Självgående och tar ansvar för ditt arbete
• Strukturerad och kvalitetsmedveten
• En lagspelare som uppskattar samarbete
• Kommunikativ och van vid dialog med kunder och andra intressenter

• Omfattning: Heltid
• Start: Enligt överenskommelse
• Placering: Skara
• Hybrid

Vi tror på att du ska få växa i den riktning som passar dig. Därför erbjuder vi kontinuerlig kompetensutveckling, certifieringsmöjligheter och tillgång till moderna verktyg och tekniker. Du blir anställd hos Experis och arbetar i uppdrag som matchar dina ambitioner, din erfarenhet och dina mål.

Som konsult hos oss får du stöd av en personlig konsultchef, tillgång till vår AI-drivna plattform Experis Career Accelerator med över 4 500 utbildningar och certifieringar samt möjligheten att bygga en långsiktig karriär inom teknik, automation och digitalisering.

Experis är ett ledande globalt konsultbolag inom IT, Tech och Engineering med över 600 konsulter i Sverige och 22 000 världen över. Vi arbetar långsiktigt med kompetensutveckling, innovation och hållbarhet där våra värderingar People, Knowledge och Innovation genomsyrar allt vi gör.

Vi erbjuder:

• Provanställning enligt kollektivavtal
• Marknadsmässig månadslön
• Tjänstepension och försäkringar
• Friskvårdsbidrag
• Reglerad semester och semesterersättning
• Kontinuerlig kompetensutveckling och certifieringsmöjligheter
• Spännande uppdrag hos attraktiva kunder
• Möjlighet att arbeta med framtidens energi- och automationslösningar Ansökan

  Låter detta som ett uppdrag för dig? Skicka in din ansökan redan idag då urval och intervjuer sker löpande.

  Vid frågor, kontakta:

  Daniel Jordacijevic Talent Acquisition Specialist, Experis daniel.jordacijevic@se.experis.com

Vi söker nu en Automation Engineer till ett spännande uppdrag där du får arbeta med avancerade automationslösningar inom elkraft, industriella nätverk och kritiska anläggningar. Här får du möjlighet att vara med genom hela projektcykeln, från design och utveckling till installation, testning och driftsättning.

I rollen som Automation Engineer får du ett stort tekniskt ansvar och arbetar nära projektledare, kunder och andra tekniska specialister för att säkerställa att lösningarna håller hög kvalitet och levereras enligt kundens krav.

Du kommer att arbeta med PLC-, HMI- och SCADA-system i kombination med modern utrustning för elkraft och automation. Projekten varierar i storlek och komplexitet, från mindre installationer till större leveranser inom exempelvis datacenter, ställverk och kraftdistributionsanläggningar.

• Ansvara för de tekniska delarna av automationsprojekt från start till färdig leverans
• Programmera och driftsätta PLC-, HMI- och SCADA-system
• Konfigurera och driftsätta industriella nätverk, gateways och kommunikationslösningar
• Installera, konfigurera, testa och driftsätta kundutrustning
• Arbeta med ställverk, reläskydd, mätutrustning, UPS-anläggningar och reservkraftslösningar
• Utföra arbete ute hos kund i driftkritiska miljöer
• Samarbeta med kunder för att förstå behov och omsätta dessa till effektiva tekniska lösningar
• Säkerställa hög kvalitet genom hela projektets livscykel

Här får du en roll där du kombinerar praktiskt ingenjörsarbete med teknisk problemlösning och kundnära samarbete.

• Har en relevant utbildning inom elkraft, automation, mekatronik, datateknik, IT eller motsvarande
• Har erfarenhet av PLC-programmering
• Har arbetat med HMI- och SCADA-system
• Har kunskap inom kraftdistribution och industriella automationslösningar
• Är bekväm med teknisk felsökning och driftsättning
• Kommunicerar obehindrat på både svenska och engelska

• Erfarenhet av industriella Ethernet-nätverk
• Kunskap inom Modbus eller Modbus TCP
• Erfarenhet av IEC 61850
• Erfarenhet av IEC 60870-5-104
• Erfarenhet av DNP3
• Erfarenhet av ställverk och reläskydd
• Erfarenhet av UPS- och reservkraftssystem
• Erfarenhet av arbete i datacenter- eller energimiljöer

• Teknisk nyfiken och har ett starkt intresse för ny teknik
• Lösningsorienterad och drivs av att lösa komplexa problem
• Självgående och tar ansvar för ditt arbete
• Strukturerad och kvalitetsmedveten
• En lagspelare som uppskattar samarbete
• Kommunikativ och van vid dialog med kunder och andra intressenter

• Omfattning: Heltid
• Start: Enligt överenskommelse
• Placering: Skara
• Hybrid

Vi tror på att du ska få växa i den riktning som passar dig. Därför erbjuder vi kontinuerlig kompetensutveckling, certifieringsmöjligheter och tillgång till moderna verktyg och tekniker. Du blir anställd hos Experis och arbetar i uppdrag som matchar dina ambitioner, din erfarenhet och dina mål.

Som konsult hos oss får du stöd av en personlig konsultchef, tillgång till vår AI-drivna plattform Experis Career Accelerator med över 4 500 utbildningar och certifieringar samt möjligheten att bygga en långsiktig karriär inom teknik, automation och digitalisering.

Experis är ett ledande globalt konsultbolag inom IT, Tech och Engineering med över 600 konsulter i Sverige och 22 000 världen över. Vi arbetar långsiktigt med kompetensutveckling, innovation och hållbarhet där våra värderingar People, Knowledge och Innovation genomsyrar allt vi gör.

Vi erbjuder:

• Provanställning enligt kollektivavtal
• Marknadsmässig månadslön
• Tjänstepension och försäkringar
• Friskvårdsbidrag
• Reglerad semester och semesterersättning
• Kontinuerlig kompetensutveckling och certifieringsmöjligheter
• Spännande uppdrag hos attraktiva kunder
• Möjlighet att arbeta med framtidens energi- och automationslösningar Ansökan

  Låter detta som ett uppdrag för dig? Skicka in din ansökan redan idag då urval och intervjuer sker löpande.

  Vid frågor, kontakta:

  Daniel Jordacijevic Talent Acquisition Specialist, Experis daniel.jordacijevic@se.experis.com

Job Scope

High level purpose of function.

A Vision Automation Engineer in a cell manufacturing company plays a key role in developing, optimizing, reverse-engineering, and maintaining machine vision and optical inspection systems to ensure safe, reliable, and efficient operations. They are responsible for programming, troubleshooting, and improving cameras, lighting configurations, and image processing algorithms, supporting both legacy production line re-commissioning and new vision system installations. The role also includes ensuring accurate data transfer, system connectivity, and smooth communication with PLCs, SCADA, and upper-level MES platforms to enable inline defect traceability, dimensional inspection, and digital integration. Close collaboration with production, engineering, and maintenance teams is required to identify and implement solutions that improve quality, throughput, and equipment uptime. A strong focus is placed on continuous improvement, safety, and scalability to meet the growing demand for electric vehicle battery production.

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards relating to equipment control and programming.
• Responsible for the FATs of the equipment (Project timeline dependent).
• Lead vision system integration and optical calibration during equipment commissioning and line re-starts (Project timeline dependent).
• Develop and reverse-engineer the vision inspection systems to be implemented in the production and logistics equipment in the factory, as well as the relevant specifications and documentation.
• Author and review engineering design documentation (Specifications, Functional design, Logic diagrams, Test Cases, Test Records).
• Train and mentor new engineers, and educate other support functions on machine vision, optics, and quality inspection gates.
• Code review and test of suppliers' vision software and algorithmic work within the projects to validate specified defect detection thresholds (Gauge R&R) and to ensure the quality and reliability of the data transferred from the equipment to the upper-level systems.
• Participate in R&D activities for piloting of new technologies and their suitability to production environments.
• Define and improve the factory blueprint, general specifications and ways of working in collaboration with the extended automation and digitalization teams. (Project timeline dependent).
• Contribute to technical improvements, development and optimization of software processes internally in the automation team
• The role requires regular presence on the production floor, with a minimum of approximately 25% of working hours spent on-site. Depending on project needs (such as line re-commissioning), there may be periods where up to 100% of working hours are required on the shop floor.
• Develop and maintain machine vision and image processing programming standards.
• Guide and mentor colleagues to industrial best practices, focussing on growth and development.
• Complete supplementary tasks as seen fit by management to effectively utilize time and resource for the benefit of the business.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelors Degree in Electronics, Mechatronics, Electrical, Automation, Robotics, Software Engineering or similar.
• Minimum of 3 years of relevant work experience within Industrial Automation in process-driven or discrete manufacturing industries such as: Battery Cell, Automotive, Chemical, Paper, Semiconductors, Pharma, Food, Warehouses, etc.
• Experience of working with industrial camera systems, optical components, and lighting techniques, including the selection, configuration, and calibration of camera hardware for manufacturing inspection and process control applications
• Experience in the design, configuration, and deployment of machine vision systems including cameras, lighting, and vision software platforms such as Cognex, Halcon, or equivalent, with experience integrating vision outputs into PLC, SCADA, and MES environments via OPC connectivity.
• Experience developing and optimising image processing pipelines and vision algorithms for applications such as defect detection, pattern recognition, and dimensional verification, with familiarity with industrial communication protocols for vision system integration.
• Experience in writing technical documentation including inspection requirement specifications, algorithm validation reports, vision system configuration records, functional design, UML, test cases, and test records.
• Experience with image processing software and programming tools relevant to industrial vision applications, such as Python, C++, OpenCV, or equivalent vision libraries, with the ability to develop, test, and optimise vision algorithms for real-time manufacturing environments
• Experienced continuous improvement and root cause analysis.

Specific skills

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems.
• Knowledge of cybersecurity best practices for manufacturing systems.
• Troubleshooting skills with diagnostic equipment.
• Ability to document technical problems concisely.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams.
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE.
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.

Job Scope

High level purpose of function.

A Senior Automation Engineer in a cell manufacturing company plays a key role in developing, optimizing, and maintaining automated production systems to ensure safe, reliable, and efficient operations. They are responsible for programming, troubleshooting, and improving PLCs, robots, and other automated equipment, supporting both new production line installations and ongoing process improvements. The role also includes ensuring accurate data transfer, system connectivity, and smooth communication with cloud platforms to enable traceability, analysis, and digital integration. Close collaboration with production, engineering, and maintenance teams is required to identify and implement solutions that improve quality, throughput, and equipment uptime. A strong focus is placed on continuous improvement, safety, and scalability to meet the growing demand for electric vehicle battery production.

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards relating to equipment control and programming.
• Responsible for the FATs of the equipment (Project timeline dependent).
• Lead automation system integration during equipment commissioning (Project timeline dependent).
• Develop the automation systems that are to be implemented in the production and logistics equipment in the factory as well as the relevant specifications and documentation.
• Author and review engineering design documentation (Specifications, Functional design, Logic diagrams, Test Cases, Test Records).
• Train and mentor new engineers, and educate other support functions on process control.
• Code review and test of suppliers work within the projects to validate specified functionality and to ensure the quality and reliability of the data transferred from the equipment to the upper level systems.
• Participate in R&D activities for piloting of new technologies and their suitability to production environments.
• Define and improve the factory blueprint, general specifications and ways of working in collaboration with the extended automation and digitalization teams. (Project timeline dependent).
• Contribute to technical improvements, development and optimization of software processes internally in the automation team
• The role requires regular presence on the production floor.
• Develop and maintain automation programming standards
• Complete supplementary tasks as seen fit by management to effectively utilize time and resource for the benefit of the business.
• Guide and mentor colleagues to industrial best practices, focussing on growth and development.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Masters Degree in Electronics, Mechatronics, Electrical, Automation, Robotics, Software Engineering or similar.
• Minimum of 7 years of relevant work experience within Industrial Automation in process-driven or discrete manufacturing industries such as: Battery Cell, Automotive, Chemical, Paper, Semiconductors, Pharma, Food, Warehouses, etc.
• Experience of working with sensors, instrumentation, servo drives and motion technology.
• Experience with PLC, SCADA, vision systems and CCD cameras and software, OPC connectivity and MES interfaces, especially using Siemens and/or Beckhoff systems.
• Experience with industrial communication protocols and network architecture including design of control systems architecture and PLC code delivering the desired system functionality.
• Experienced continuous improvement and root cause analysis.
• Experience in writing technical documentation (Requirement specifications, Functional design, UML, Test Cases, Test Records).

Specific skills

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems.
• Knowledge of cybersecurity best practices for manufacturing systems.
• Highly autonomous with a proactive mindset and work ethic.
• Troubleshooting skills with diagnostic equipment.
• Ability to document technical problems concisely.
• Experience in coaching, upskilling, and mentoring engineers or technicians, with a demonstrable commitment to developing the technical capability of others within a production environment.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams.
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE.
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.

Job Scope

High level purpose of function.

An Automation Engineer in a cell manufacturing company plays a key role in developing, optimizing, and maintaining automated production systems to ensure safe, reliable, and efficient operations. They are responsible for programming, troubleshooting, and improving PLCs, robots, and other automated equipment, supporting both new production line installations and ongoing process improvements. The role also includes ensuring accurate data transfer, system connectivity, and smooth communication with cloud platforms to enable traceability, analysis, and digital integration. Close collaboration with production, engineering, and maintenance teams is required to identify and implement solutions that improve quality, throughput, and equipment uptime. A strong focus is placed on continuous improvement, safety, and scalability to meet the growing demand for electric vehicle battery production.

Key Responsibilities

Overall areas of responsibilities and activities.

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards relating to equipment control and programming.
• Responsible for the FATs of the equipment (Project timeline dependent).
• Lead automation system integration during equipment commissioning (Project timeline dependent).
• Develop the automation systems that are to be implemented in the production and logistics equipment in the factory as well as the relevant specifications and documentation.
• Author and review engineering design documentation (Specifications, Functional design, Logic diagrams, Test Cases, Test Records).
• Train and mentor new engineers, and educate other support functions on process control.
• Code review and test of suppliers work within the projects to validate specified functionality and to ensure the quality and reliability of the data transferred from the equipment to the upper level systems.
• Participate in R&D activities for piloting of new technologies and their suitability to production environments.
• Define and improve the factory blueprint, general specifications and ways of working in collaboration with the extended automation and digitalization teams. (Project timeline dependent).
• Contribute to technical improvements, development and optimization of software processes internally in the automation team.
• The role requires regular presence on the production floor.
• Develop and maintain automation programming standards.
• Complete supplementary tasks as seen fit by management to effectively utilize time and resource for the benefit of the business.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelors degree in Electronics, Mechatronics, Electrical, Automation, Robotics, Software Engineering or similar.
• Minimum of 3 years of relevant work experience within Industrial Automation in process-driven or discrete manufacturing industries such as: Battery Cell, Automotive, Chemical, Paper, Semiconductors, Pharma, Food, Warehouses, etc.
• Experience of working with sensors, instrumentation, servo drives and motion technology.
• Experience with PLC, SCADA, OPC connectivity and MES interfaces, especially using Siemens and/or Beckhoff systems.
• Experience with industrial communication protocols and network architecture including design of control systems architecture and PLC code delivering the desired system functionality.
• Experience in writing technical documentation (Requirement specifications, Functional design, UML, Test Cases, Test Records).
• Experienced in continuous improvement and root cause analysis.

Specific skills & Knowledge

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems.
• Knowledge of cybersecurity best practices for manufacturing systems.
• Troubleshooting skills with diagnostic equipment.
• Ability to document technical problems concisely.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams.
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE.
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.

Job Scope

High level purpose of function.

A Vision Automation Engineer in a cell manufacturing company plays a key role in developing, optimizing, reverse-engineering, and maintaining machine vision and optical inspection systems to ensure safe, reliable, and efficient operations. They are responsible for programming, troubleshooting, and improving cameras, lighting configurations, and image processing algorithms, supporting both legacy production line re-commissioning and new vision system installations. The role also includes ensuring accurate data transfer, system connectivity, and smooth communication with PLCs, SCADA, and upper-level MES platforms to enable inline defect traceability, dimensional inspection, and digital integration. Close collaboration with production, engineering, and maintenance teams is required to identify and implement solutions that improve quality, throughput, and equipment uptime. A strong focus is placed on continuous improvement, safety, and scalability to meet the growing demand for electric vehicle battery production.

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards relating to equipment control and programming.
• Responsible for the FATs of the equipment (Project timeline dependent).
• Lead vision system integration and optical calibration during equipment commissioning and line re-starts (Project timeline dependent).
• Develop and reverse-engineer the vision inspection systems to be implemented in the production and logistics equipment in the factory, as well as the relevant specifications and documentation.
• Author and review engineering design documentation (Specifications, Functional design, Logic diagrams, Test Cases, Test Records).
• Train and mentor new engineers, and educate other support functions on machine vision, optics, and quality inspection gates.
• Code review and test of suppliers' vision software and algorithmic work within the projects to validate specified defect detection thresholds (Gauge R&R) and to ensure the quality and reliability of the data transferred from the equipment to the upper-level systems.
• Participate in R&D activities for piloting of new technologies and their suitability to production environments.
• Define and improve the factory blueprint, general specifications and ways of working in collaboration with the extended automation and digitalization teams. (Project timeline dependent).
• Contribute to technical improvements, development and optimization of software processes internally in the automation team
• The role requires regular presence on the production floor, with a minimum of approximately 25% of working hours spent on-site. Depending on project needs (such as line re-commissioning), there may be periods where up to 100% of working hours are required on the shop floor.
• Develop and maintain machine vision and image processing programming standards.
• Guide and mentor colleagues to industrial best practices, focussing on growth and development.
• Complete supplementary tasks as seen fit by management to effectively utilize time and resource for the benefit of the business.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelors Degree in Electronics, Mechatronics, Electrical, Automation, Robotics, Software Engineering or similar.
• Minimum of 3 years of relevant work experience within Industrial Automation in process-driven or discrete manufacturing industries such as: Battery Cell, Automotive, Chemical, Paper, Semiconductors, Pharma, Food, Warehouses, etc.
• Experience of working with industrial camera systems, optical components, and lighting techniques, including the selection, configuration, and calibration of camera hardware for manufacturing inspection and process control applications
• Experience in the design, configuration, and deployment of machine vision systems including cameras, lighting, and vision software platforms such as Cognex, Halcon, or equivalent, with experience integrating vision outputs into PLC, SCADA, and MES environments via OPC connectivity.
• Experience developing and optimising image processing pipelines and vision algorithms for applications such as defect detection, pattern recognition, and dimensional verification, with familiarity with industrial communication protocols for vision system integration.
• Experience in writing technical documentation including inspection requirement specifications, algorithm validation reports, vision system configuration records, functional design, UML, test cases, and test records.
• Experience with image processing software and programming tools relevant to industrial vision applications, such as Python, C++, OpenCV, or equivalent vision libraries, with the ability to develop, test, and optimise vision algorithms for real-time manufacturing environments
• Experienced continuous improvement and root cause analysis.

Specific skills

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems.
• Knowledge of cybersecurity best practices for manufacturing systems.
• Troubleshooting skills with diagnostic equipment.
• Ability to document technical problems concisely.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams.
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE.
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.

Job Scope

High level purpose of function.

A Vision Automation Engineer in a cell manufacturing company plays a key role in developing, optimizing, reverse-engineering, and maintaining machine vision and optical inspection systems to ensure safe, reliable, and efficient operations. They are responsible for programming, troubleshooting, and improving cameras, lighting configurations, and image processing algorithms, supporting both legacy production line re-commissioning and new vision system installations. The role also includes ensuring accurate data transfer, system connectivity, and smooth communication with PLCs, SCADA, and upper-level MES platforms to enable inline defect traceability, dimensional inspection, and digital integration. Close collaboration with production, engineering, and maintenance teams is required to identify and implement solutions that improve quality, throughput, and equipment uptime. A strong focus is placed on continuous improvement, safety, and scalability to meet the growing demand for electric vehicle battery production.

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards relating to equipment control and programming.
• Responsible for the FATs of the equipment (Project timeline dependent).
• Lead vision system integration and optical calibration during equipment commissioning and line re-starts (Project timeline dependent).
• Develop and reverse-engineer the vision inspection systems to be implemented in the production and logistics equipment in the factory, as well as the relevant specifications and documentation.
• Author and review engineering design documentation (Specifications, Functional design, Logic diagrams, Test Cases, Test Records).
• Train and mentor new engineers, and educate other support functions on machine vision, optics, and quality inspection gates.
• Code review and test of suppliers' vision software and algorithmic work within the projects to validate specified defect detection thresholds (Gauge R&R) and to ensure the quality and reliability of the data transferred from the equipment to the upper-level systems.
• Participate in R&D activities for piloting of new technologies and their suitability to production environments.
• Define and improve the factory blueprint, general specifications and ways of working in collaboration with the extended automation and digitalization teams. (Project timeline dependent).
• Contribute to technical improvements, development and optimization of software processes internally in the automation team
• The role requires regular presence on the production floor, with a minimum of approximately 25% of working hours spent on-site. Depending on project needs (such as line re-commissioning), there may be periods where up to 100% of working hours are required on the shop floor.
• Develop and maintain machine vision and image processing programming standards.
• Guide and mentor colleagues to industrial best practices, focussing on growth and development.
• Complete supplementary tasks as seen fit by management to effectively utilize time and resource for the benefit of the business.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelors Degree in Electronics, Mechatronics, Electrical, Automation, Robotics, Software Engineering or similar.
• Minimum of 3 years of relevant work experience within Industrial Automation in process-driven or discrete manufacturing industries such as: Battery Cell, Automotive, Chemical, Paper, Semiconductors, Pharma, Food, Warehouses, etc.
• Experience of working with industrial camera systems, optical components, and lighting techniques, including the selection, configuration, and calibration of camera hardware for manufacturing inspection and process control applications
• Experience in the design, configuration, and deployment of machine vision systems including cameras, lighting, and vision software platforms such as Cognex, Halcon, or equivalent, with experience integrating vision outputs into PLC, SCADA, and MES environments via OPC connectivity.
• Experience developing and optimising image processing pipelines and vision algorithms for applications such as defect detection, pattern recognition, and dimensional verification, with familiarity with industrial communication protocols for vision system integration.
• Experience in writing technical documentation including inspection requirement specifications, algorithm validation reports, vision system configuration records, functional design, UML, test cases, and test records.
• Experience with image processing software and programming tools relevant to industrial vision applications, such as Python, C++, OpenCV, or equivalent vision libraries, with the ability to develop, test, and optimise vision algorithms for real-time manufacturing environments
• Experienced continuous improvement and root cause analysis.

Specific skills

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems.
• Knowledge of cybersecurity best practices for manufacturing systems.
• Troubleshooting skills with diagnostic equipment.
• Ability to document technical problems concisely.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams.
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE.
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.

Job Scope

High level purpose of function.

A Vision Automation Engineer in a cell manufacturing company plays a key role in developing, optimizing, reverse-engineering, and maintaining machine vision and optical inspection systems to ensure safe, reliable, and efficient operations. They are responsible for programming, troubleshooting, and improving cameras, lighting configurations, and image processing algorithms, supporting both legacy production line re-commissioning and new vision system installations. The role also includes ensuring accurate data transfer, system connectivity, and smooth communication with PLCs, SCADA, and upper-level MES platforms to enable inline defect traceability, dimensional inspection, and digital integration. Close collaboration with production, engineering, and maintenance teams is required to identify and implement solutions that improve quality, throughput, and equipment uptime. A strong focus is placed on continuous improvement, safety, and scalability to meet the growing demand for electric vehicle battery production.

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards relating to equipment control and programming.
• Responsible for the FATs of the equipment (Project timeline dependent).
• Lead vision system integration and optical calibration during equipment commissioning and line re-starts (Project timeline dependent).
• Develop and reverse-engineer the vision inspection systems to be implemented in the production and logistics equipment in the factory, as well as the relevant specifications and documentation.
• Author and review engineering design documentation (Specifications, Functional design, Logic diagrams, Test Cases, Test Records).
• Train and mentor new engineers, and educate other support functions on machine vision, optics, and quality inspection gates.
• Code review and test of suppliers' vision software and algorithmic work within the projects to validate specified defect detection thresholds (Gauge R&R) and to ensure the quality and reliability of the data transferred from the equipment to the upper-level systems.
• Participate in R&D activities for piloting of new technologies and their suitability to production environments.
• Define and improve the factory blueprint, general specifications and ways of working in collaboration with the extended automation and digitalization teams. (Project timeline dependent).
• Contribute to technical improvements, development and optimization of software processes internally in the automation team
• The role requires regular presence on the production floor, with a minimum of approximately 25% of working hours spent on-site. Depending on project needs (such as line re-commissioning), there may be periods where up to 100% of working hours are required on the shop floor.
• Develop and maintain machine vision and image processing programming standards.
• Guide and mentor colleagues to industrial best practices, focussing on growth and development.
• Complete supplementary tasks as seen fit by management to effectively utilize time and resource for the benefit of the business.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelors Degree in Electronics, Mechatronics, Electrical, Automation, Robotics, Software Engineering or similar.
• Minimum of 3 years of relevant work experience within Industrial Automation in process-driven or discrete manufacturing industries such as: Battery Cell, Automotive, Chemical, Paper, Semiconductors, Pharma, Food, Warehouses, etc.
• Experience of working with industrial camera systems, optical components, and lighting techniques, including the selection, configuration, and calibration of camera hardware for manufacturing inspection and process control applications
• Experience in the design, configuration, and deployment of machine vision systems including cameras, lighting, and vision software platforms such as Cognex, Halcon, or equivalent, with experience integrating vision outputs into PLC, SCADA, and MES environments via OPC connectivity.
• Experience developing and optimising image processing pipelines and vision algorithms for applications such as defect detection, pattern recognition, and dimensional verification, with familiarity with industrial communication protocols for vision system integration.
• Experience in writing technical documentation including inspection requirement specifications, algorithm validation reports, vision system configuration records, functional design, UML, test cases, and test records.
• Experience with image processing software and programming tools relevant to industrial vision applications, such as Python, C++, OpenCV, or equivalent vision libraries, with the ability to develop, test, and optimise vision algorithms for real-time manufacturing environments
• Experienced continuous improvement and root cause analysis.

Specific skills

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems.
• Knowledge of cybersecurity best practices for manufacturing systems.
• Troubleshooting skills with diagnostic equipment.
• Ability to document technical problems concisely.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams.
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE.
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.

Job Scope

High level purpose of function.

A Vision Automation Engineer in a cell manufacturing company plays a key role in developing, optimizing, reverse-engineering, and maintaining machine vision and optical inspection systems to ensure safe, reliable, and efficient operations. They are responsible for programming, troubleshooting, and improving cameras, lighting configurations, and image processing algorithms, supporting both legacy production line re-commissioning and new vision system installations. The role also includes ensuring accurate data transfer, system connectivity, and smooth communication with PLCs, SCADA, and upper-level MES platforms to enable inline defect traceability, dimensional inspection, and digital integration. Close collaboration with production, engineering, and maintenance teams is required to identify and implement solutions that improve quality, throughput, and equipment uptime. A strong focus is placed on continuous improvement, safety, and scalability to meet the growing demand for electric vehicle battery production.

Key Responsibilities

Overall areas of responsibilities and activities

Key responsibilities include (but are not limited to)

• Participate in HAZOP sessions and ensure compliance with process safety, operational safety, and environmental standards relating to equipment control and programming.
• Responsible for the FATs of the equipment (Project timeline dependent).
• Lead vision system integration and optical calibration during equipment commissioning and line re-starts (Project timeline dependent).
• Develop and reverse-engineer the vision inspection systems to be implemented in the production and logistics equipment in the factory, as well as the relevant specifications and documentation.
• Author and review engineering design documentation (Specifications, Functional design, Logic diagrams, Test Cases, Test Records).
• Train and mentor new engineers, and educate other support functions on machine vision, optics, and quality inspection gates.
• Code review and test of suppliers' vision software and algorithmic work within the projects to validate specified defect detection thresholds (Gauge R&R) and to ensure the quality and reliability of the data transferred from the equipment to the upper-level systems.
• Participate in R&D activities for piloting of new technologies and their suitability to production environments.
• Define and improve the factory blueprint, general specifications and ways of working in collaboration with the extended automation and digitalization teams. (Project timeline dependent).
• Contribute to technical improvements, development and optimization of software processes internally in the automation team
• The role requires regular presence on the production floor, with a minimum of approximately 25% of working hours spent on-site. Depending on project needs (such as line re-commissioning), there may be periods where up to 100% of working hours are required on the shop floor.
• Develop and maintain machine vision and image processing programming standards.
• Guide and mentor colleagues to industrial best practices, focussing on growth and development.
• Complete supplementary tasks as seen fit by management to effectively utilize time and resource for the benefit of the business.

Requirements

Educational background and previous experience required for the role

Qualifications and Experience

• Bachelors Degree in Electronics, Mechatronics, Electrical, Automation, Robotics, Software Engineering or similar.
• Minimum of 3 years of relevant work experience within Industrial Automation in process-driven or discrete manufacturing industries such as: Battery Cell, Automotive, Chemical, Paper, Semiconductors, Pharma, Food, Warehouses, etc.
• Experience of working with industrial camera systems, optical components, and lighting techniques, including the selection, configuration, and calibration of camera hardware for manufacturing inspection and process control applications
• Experience in the design, configuration, and deployment of machine vision systems including cameras, lighting, and vision software platforms such as Cognex, Halcon, or equivalent, with experience integrating vision outputs into PLC, SCADA, and MES environments via OPC connectivity.
• Experience developing and optimising image processing pipelines and vision algorithms for applications such as defect detection, pattern recognition, and dimensional verification, with familiarity with industrial communication protocols for vision system integration.
• Experience in writing technical documentation including inspection requirement specifications, algorithm validation reports, vision system configuration records, functional design, UML, test cases, and test records.
• Experience with image processing software and programming tools relevant to industrial vision applications, such as Python, C++, OpenCV, or equivalent vision libraries, with the ability to develop, test, and optimise vision algorithms for real-time manufacturing environments
• Experienced continuous improvement and root cause analysis.

Specific skills

• Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems.
• Knowledge of cybersecurity best practices for manufacturing systems.
• Troubleshooting skills with diagnostic equipment.
• Ability to document technical problems concisely.
• Excellent English skills, both written and oral, are essential. Basic Swedish and other language skills are a plus. You should have good communication skills and be able to work in close collaboration with colleagues from many different teams.
• Ability to work within varying environments including clean-rooms and dry-rooms, while wearing appropriate PPE.
• Comfortable operating in high-profile, international, and high-pressure environments.
• A genuine technical interest and passion about working within production is highly valued.