Bildesigner - Lediga jobb

Corrpal Systems i Ystad tillverkar, säljer och installerar maskinlinjer för materialhantering till wellpappindustrin. Vi är en ledande aktör inom vår nisch och vår styrka är vår svenska kvalitet och vår förmåga att flexibelt lösa våra kunders olika behov.

Just nu söker vi en mekanisk designer som vill bli en del av ett engagerat, målinriktat och stöttande team. Idag består teamet av sex kollegor som arbetar nära varandra, delar med sig av sin kunskap och hjälper varandra att lyckas. Tillsammans tar vi ansvar för att leverera hög kvalitet i varje projekt och skapa lösningar vi är stolta över.

I rollen som mekanisk designer kommer du att utveckla, konstruera och anpassa mekaniska lösningar för våra maskiner och vår utrustning. Genom att omsätta kund- och funktionskrav till genomtänka och tillverkningsbara konstruktioner bidrar du till hög kvalitet, effektiv produktion och tillförlitliga leveranser till våra kunder.

Dina huvudsakliga arbetsuppgifter

• Utveckla och konstruera mekaniska lösningar för maskiner och maskinlinjer

• Ta fram 3D-modeller, ritningar och teknisk dokumentation

• Delta i kravspecifikation och konceptframtagning tillsammans med projektteam

• Anpassa konstruktioner efter kundspecifika behov

• Säkerställa att konstruktioner följer gällande standarder, direktiv och interna riktlinjer

• Samarbeta med produktion, montage, service, inköp och automation för att säkerställa tillverkningsbarhet

• Delta vid prototypbyggnation, test och verifiering

• Bidra till förbättring och standardisering av mekaniska lösningar

Vi söker dig som har ett genuint teknikintresse och trivs med att kombinera praktiskt arbete med problemlösning. Du är inte rädd för att ta egna initiativ, kavla upp ärmarna när det behövs och motiveras av att se konkreta resultat av ditt arbete.

Som person är du analytisk, strukturerad och kreativ. Du har ett lösningsorienterat arbetssätt, tycker om att samarbeta med andra och kommunicerar på ett tydligt och lyhört sätt. Du trivs i en miljö där idéer delas, utvecklas och omsätts i praktiken – och där du får möjlighet att göra verklig skillnad.

Vi ser gärna att du har

• 3-5 års arbetslivserfarenhet inom maskindesign, maskintillverkning eller liknande

• Eftergymnasial utbildning inom relevant område

• God förståelse inom materiallära och tillverkningsprocesser

• Goda kunskaper inom CAD (Inventor och Autodesk Suite)

• Talar svenska och engelska

Det är meriterande om du har

• Erfarenhet av ERP system (Monitor G5)

• Kandidat eller Master som maskiningenjör eller liknande

Corrpal Systems AB i Ystad tillverkar, säljer och installerar maskinlinjer för materialhantering till wellpappindustrin. Vi är en ledande aktör inom vår nisch och vår styrka är vår svenska kvalitet och vår förmåga att flexibelt lösa våra kunders olika behov.

Med egen kompetens i huset tillverkar vi och levererar cirka 30–40 maskiner per år. Våra kunder finns huvudsakligen i Europa, men våra installationer finns över hela världen. Corrpal Systems omsätter ca. 300 msek och har 50 anställda.

På Corrpal Systems AB får du arbeta i ett växande företag med korta beslutsvägar, teknik i framkant och stort utrymme för egna initiativ. Vi tror starkt på att människor med olika bakgrunder, erfarenheter och perspektiv är viktigt för att göra Corrpal Systems till ett bra, utvecklande och roligt ställe att arbeta på.

Läs mer om oss på vår hemsida: www.corrpal.com

Du kan även läsa mer om vår ägare Göpfert Maschinen GmbH, www.goepfert.de, som är världsledande på konverteringsmaskiner till wellpappindustrin.

Sista ansökningsdagen är 4/9. Observera att annonsen kan tas ner tidigare då vi jobbar med ett löpande urval. Ligger annonsen kvar är tjänsten inte tillsatt utan processen fortgår. Ansöker du vecka 29-31 kommer det dröja någon vecka med återkoppling, men vi kommer höra av oss till alla och tar inget beslut innan efter det.

Ett personligt brev är inte nödvändigt i denna rekrytering, lägg hellre lite mer fokus på urvalsfrågorna.

Corrpal Systems samarbetar i denna rekrytering med EQuality. Har du några frågor är du varmt välkommen att kontakta rekryteringsteamet på EQuality:

• Jennifer Friman på jennifer.friman@equality.nu eller 0703-20 12 12

• Karl-Johan Kjellberg på karl-johan.kjellberg@equality.nu eller 0701-71 94 17

Med EQuality får du kvalitet i rekryteringen. Vi får verksamheter framgångsrika genom rätt person på rätt plats. EQuality arbetar branschöverskridande och fokuserar på exekutiva befattningar och nyckelfunktioner. Vi arbetar med executive search, rekrytering & interim samt med tester och kandidatutvärdering.

Våra värderingar är professionalism, transparens och engagemang och EQuality står för:

• EQ - Emotionell intelligens är lika viktigt som IQ

• Equality - Mångfald och jämlikhet är en självklarhet för oss

• Quality - Vi säkerställer kvalitet i varje rekrytering, både för kund och kandidat

Corrpal Systems i Ystad tillverkar, säljer och installerar maskinlinjer för materialhantering till wellpappindustrin. Vi är en ledande aktör inom vår nisch och vår styrka är vår svenska kvalitet och vår förmåga att flexibelt lösa våra kunders olika behov.

Just nu söker vi en mekanisk designer som vill bli en del av ett engagerat, målinriktat och stöttande team. Idag består teamet av sex kollegor som arbetar nära varandra, delar med sig av sin kunskap och hjälper varandra att lyckas. Tillsammans tar vi ansvar för att leverera hög kvalitet i varje projekt och skapa lösningar vi är stolta över.

I rollen som mekanisk designer kommer du att utveckla, konstruera och anpassa mekaniska lösningar för våra maskiner och vår utrustning. Genom att omsätta kund- och funktionskrav till genomtänka och tillverkningsbara konstruktioner bidrar du till hög kvalitet, effektiv produktion och tillförlitliga leveranser till våra kunder.

Dina huvudsakliga arbetsuppgifter

• Utveckla och konstruera mekaniska lösningar för maskiner och maskinlinjer

• Ta fram 3D-modeller, ritningar och teknisk dokumentation

• Delta i kravspecifikation och konceptframtagning tillsammans med projektteam

• Anpassa konstruktioner efter kundspecifika behov

• Säkerställa att konstruktioner följer gällande standarder, direktiv och interna riktlinjer

• Samarbeta med produktion, montage, service, inköp och automation för att säkerställa tillverkningsbarhet

• Delta vid prototypbyggnation, test och verifiering

• Bidra till förbättring och standardisering av mekaniska lösningar

Vi söker dig som har ett genuint teknikintresse och trivs med att kombinera praktiskt arbete med problemlösning. Du är inte rädd för att ta egna initiativ, kavla upp ärmarna när det behövs och motiveras av att se konkreta resultat av ditt arbete.

Som person är du analytisk, strukturerad och kreativ. Du har ett lösningsorienterat arbetssätt, tycker om att samarbeta med andra och kommunicerar på ett tydligt och lyhört sätt. Du trivs i en miljö där idéer delas, utvecklas och omsätts i praktiken – och där du får möjlighet att göra verklig skillnad.

Vi ser gärna att du har

• 3-5 års arbetslivserfarenhet inom maskindesign, maskintillverkning eller liknande

• Eftergymnasial utbildning inom relevant område

• God förståelse inom materiallära och tillverkningsprocesser

• Goda kunskaper inom CAD (Inventor och Autodesk Suite)

• Talar svenska och engelska

Det är meriterande om du har

• Erfarenhet av ERP system (Monitor G5)

• Kandidat eller Master som maskiningenjör eller liknande

Corrpal Systems AB i Ystad tillverkar, säljer och installerar maskinlinjer för materialhantering till wellpappindustrin. Vi är en ledande aktör inom vår nisch och vår styrka är vår svenska kvalitet och vår förmåga att flexibelt lösa våra kunders olika behov.

Med egen kompetens i huset tillverkar vi och levererar cirka 30–40 maskiner per år. Våra kunder finns huvudsakligen i Europa, men våra installationer finns över hela världen. Corrpal Systems omsätter ca. 300 msek och har 50 anställda.

På Corrpal Systems AB får du arbeta i ett växande företag med korta beslutsvägar, teknik i framkant och stort utrymme för egna initiativ. Vi tror starkt på att människor med olika bakgrunder, erfarenheter och perspektiv är viktigt för att göra Corrpal Systems till ett bra, utvecklande och roligt ställe att arbeta på.

Läs mer om oss på vår hemsida: www.corrpal.com

Du kan även läsa mer om vår ägare Göpfert Maschinen GmbH, www.goepfert.de, som är världsledande på konverteringsmaskiner till wellpappindustrin.

Sista ansökningsdagen är 4/9. Observera att annonsen kan tas ner tidigare då vi jobbar med ett löpande urval. Ligger annonsen kvar är tjänsten inte tillsatt utan processen fortgår. Ansöker du vecka 29-31 kommer det dröja någon vecka med återkoppling, men vi kommer höra av oss till alla och tar inget beslut innan efter det.

Ett personligt brev är inte nödvändigt i denna rekrytering, lägg hellre lite mer fokus på urvalsfrågorna.

Corrpal Systems samarbetar i denna rekrytering med EQuality. Har du några frågor är du varmt välkommen att kontakta rekryteringsteamet på EQuality:

• Jennifer Friman på jennifer.friman@equality.nu eller 0703-20 12 12

• Karl-Johan Kjellberg på karl-johan.kjellberg@equality.nu eller 0701-71 94 17

Med EQuality får du kvalitet i rekryteringen. Vi får verksamheter framgångsrika genom rätt person på rätt plats. EQuality arbetar branschöverskridande och fokuserar på exekutiva befattningar och nyckelfunktioner. Vi arbetar med executive search, rekrytering & interim samt med tester och kandidatutvärdering.

Våra värderingar är professionalism, transparens och engagemang och EQuality står för:

• EQ - Emotionell intelligens är lika viktigt som IQ

• Equality - Mångfald och jämlikhet är en självklarhet för oss

• Quality - Vi säkerställer kvalitet i varje rekrytering, både för kund och kandidat

Corrpal Systems i Ystad tillverkar, säljer och installerar maskinlinjer för materialhantering till wellpappindustrin. Vi är en ledande aktör inom vår nisch och vår styrka är vår svenska kvalitet och vår förmåga att flexibelt lösa våra kunders olika behov.

Just nu söker vi en mekanisk designer som vill bli en del av ett engagerat, målinriktat och stöttande team. Idag består teamet av sex kollegor som arbetar nära varandra, delar med sig av sin kunskap och hjälper varandra att lyckas. Tillsammans tar vi ansvar för att leverera hög kvalitet i varje projekt och skapa lösningar vi är stolta över.

I rollen som mekanisk designer kommer du att utveckla, konstruera och anpassa mekaniska lösningar för våra maskiner och vår utrustning. Genom att omsätta kund- och funktionskrav till genomtänka och tillverkningsbara konstruktioner bidrar du till hög kvalitet, effektiv produktion och tillförlitliga leveranser till våra kunder.

Dina huvudsakliga arbetsuppgifter

• Utveckla och konstruera mekaniska lösningar för maskiner och maskinlinjer

• Ta fram 3D-modeller, ritningar och teknisk dokumentation

• Delta i kravspecifikation och konceptframtagning tillsammans med projektteam

• Anpassa konstruktioner efter kundspecifika behov

• Säkerställa att konstruktioner följer gällande standarder, direktiv och interna riktlinjer

• Samarbeta med produktion, montage, service, inköp och automation för att säkerställa tillverkningsbarhet

• Delta vid prototypbyggnation, test och verifiering

• Bidra till förbättring och standardisering av mekaniska lösningar

Vi söker dig som har ett genuint teknikintresse och trivs med att kombinera praktiskt arbete med problemlösning. Du är inte rädd för att ta egna initiativ, kavla upp ärmarna när det behövs och motiveras av att se konkreta resultat av ditt arbete.

Som person är du analytisk, strukturerad och kreativ. Du har ett lösningsorienterat arbetssätt, tycker om att samarbeta med andra och kommunicerar på ett tydligt och lyhört sätt. Du trivs i en miljö där idéer delas, utvecklas och omsätts i praktiken – och där du får möjlighet att göra verklig skillnad.

Vi ser gärna att du har

• 3-5 års arbetslivserfarenhet inom maskindesign, maskintillverkning eller liknande

• Eftergymnasial utbildning inom relevant område

• God förståelse inom materiallära och tillverkningsprocesser

• Goda kunskaper inom CAD (Inventor och Autodesk Suite)

• Talar svenska och engelska

Det är meriterande om du har

• Erfarenhet av ERP system (Monitor G5)

• Kandidat eller Master som maskiningenjör eller liknande

Corrpal Systems AB i Ystad tillverkar, säljer och installerar maskinlinjer för materialhantering till wellpappindustrin. Vi är en ledande aktör inom vår nisch och vår styrka är vår svenska kvalitet och vår förmåga att flexibelt lösa våra kunders olika behov.

Med egen kompetens i huset tillverkar vi och levererar cirka 30–40 maskiner per år. Våra kunder finns huvudsakligen i Europa, men våra installationer finns över hela världen. Corrpal Systems omsätter ca. 300 msek och har 50 anställda.

På Corrpal Systems AB får du arbeta i ett växande företag med korta beslutsvägar, teknik i framkant och stort utrymme för egna initiativ. Vi tror starkt på att människor med olika bakgrunder, erfarenheter och perspektiv är viktigt för att göra Corrpal Systems till ett bra, utvecklande och roligt ställe att arbeta på.

Läs mer om oss på vår hemsida: www.corrpal.com

Du kan även läsa mer om vår ägare Göpfert Maschinen GmbH, www.goepfert.de, som är världsledande på konverteringsmaskiner till wellpappindustrin.

Sista ansökningsdagen är 4/9. Observera att annonsen kan tas ner tidigare då vi jobbar med ett löpande urval. Ligger annonsen kvar är tjänsten inte tillsatt utan processen fortgår. Ansöker du vecka 29-31 kommer det dröja någon vecka med återkoppling, men vi kommer höra av oss till alla och tar inget beslut innan efter det.

Ett personligt brev är inte nödvändigt i denna rekrytering, lägg hellre lite mer fokus på urvalsfrågorna.

Corrpal Systems samarbetar i denna rekrytering med EQuality. Har du några frågor är du varmt välkommen att kontakta rekryteringsteamet på EQuality:

• Jennifer Friman på jennifer.friman@equality.nu eller 0703-20 12 12

• Karl-Johan Kjellberg på karl-johan.kjellberg@equality.nu eller 0701-71 94 17

Med EQuality får du kvalitet i rekryteringen. Vi får verksamheter framgångsrika genom rätt person på rätt plats. EQuality arbetar branschöverskridande och fokuserar på exekutiva befattningar och nyckelfunktioner. Vi arbetar med executive search, rekrytering & interim samt med tester och kandidatutvärdering.

Våra värderingar är professionalism, transparens och engagemang och EQuality står för:

• EQ - Emotionell intelligens är lika viktigt som IQ

• Equality - Mångfald och jämlikhet är en självklarhet för oss

• Quality - Vi säkerställer kvalitet i varje rekrytering, både för kund och kandidat

Who are we?Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent. We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Green Propulsion and Thermal Management are increasingly important areas for Volvo Cars to become leading in Electrification. Thermal Management have a key role in energy efficient propulsion by optimizing control towards customer functions and balancing attributes. The systems are getting more advanced and complex including different temperature levels, cooling down, heating up, transfer/transport and store heat for electric motors, battery, control modules etc. All this needs to be designed with sustainability in focus.

Thermal management is a part of the Energy department within the unit Propulsion & Energy. The section Thermal & Energy Management is divided into four groups, working closely together for a complete Thermal Management system delivery, both on HW and SW side. Our group, Thermal System & Function, have ownership of Thermal management from first architectural sketch, on HW and functional side, including concept design, to system development and ownership within our running programs. We are 12 persons with high ambitions, different ages, background and experience. We are characterized as an open and friendly group where everyone shares their knowledge with each other.

As an engineer working with Function Realisation and System Design you are a key person for total coordination of the electrical realization of Thermal Management functionality. You work in close cooperation with other technical areas, attributes and aspects. Within the department you will work in close cooperation with our Function owner, System architects, SW developers, CAE engineers and Component owners.

You will also:

• Lead the system design and implementation of Thermal Management functionality across departments
• Break down functional behavior to requirements for SW implementation, both within our department and to other technical areas if needed
• Lead the system design work with allocation of both software components, actuators and sensors
• Lead the System Safety work within the thermal area, ensuring functional safety fulfilment of the Thermal Management System. You will also participate / support in other work packages such as HARA, PRSP and similar work products lead by function / SW architect
• Participate in future development and improvement of our Thermal Management functionalities, documented in our Technical and Functional Roadmaps
• Participate in developing our Verification plan (AVN) on system- and complete vehicle level, regarding the function, both generic and per program

You have experience from functionality or software development best practices. To fit our diverse team, you need to be a team player that believes in inclusiveness. As a person you are structured, supportive and contribute with personal energy.

You would bring an University degree BSc or MSc within mechatronics, electrical or electronics as well as 5+ years working experience within relevant field. You bring experience from SW/ Function development and/or testing within automotive development is meritorious. 

You bring experience within control technology, theoretically and from practical applications, are considered as an advantage within this role as well as from diagnostics concept development is considered as an advantage.

You are curious, structured, good analytical skills and a great technical interest. You have attention to details are important, but also having the ability to visualize the entire picture. 

You are fluent in English (written and spoken) as well as carry a valid driving license (B).

Who are we?Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent. We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Green Propulsion and Thermal Management are increasingly important areas for Volvo Cars to become leading in Electrification. Thermal Management have a key role in energy efficient propulsion by optimizing control towards customer functions and balancing attributes. The systems are getting more advanced and complex including different temperature levels, cooling down, heating up, transfer/transport and store heat for electric motors, battery, control modules etc. All this needs to be designed with sustainability in focus.

Thermal management is a part of the Energy department within the unit Propulsion & Energy. The section Thermal & Energy Management is divided into four groups, working closely together for a complete Thermal Management system delivery, both on HW and SW side. Our group, Thermal System & Function, have ownership of Thermal management from first architectural sketch, on HW and functional side, including concept design, to system development and ownership within our running programs. We are 12 persons with high ambitions, different ages, background and experience. We are characterized as an open and friendly group where everyone shares their knowledge with each other.

As an engineer working with Function Realisation and System Design you are a key person for total coordination of the electrical realization of Thermal Management functionality. You work in close cooperation with other technical areas, attributes and aspects. Within the department you will work in close cooperation with our Function owner, System architects, SW developers, CAE engineers and Component owners.

You will also:

• Lead the system design and implementation of Thermal Management functionality across departments
• Break down functional behavior to requirements for SW implementation, both within our department and to other technical areas if needed
• Lead the system design work with allocation of both software components, actuators and sensors
• Lead the System Safety work within the thermal area, ensuring functional safety fulfilment of the Thermal Management System. You will also participate / support in other work packages such as HARA, PRSP and similar work products lead by function / SW architect
• Participate in future development and improvement of our Thermal Management functionalities, documented in our Technical and Functional Roadmaps
• Participate in developing our Verification plan (AVN) on system- and complete vehicle level, regarding the function, both generic and per program

You have experience from functionality or software development best practices. To fit our diverse team, you need to be a team player that believes in inclusiveness. As a person you are structured, supportive and contribute with personal energy.

You would bring an University degree BSc or MSc within mechatronics, electrical or electronics as well as 5+ years working experience within relevant field. You bring experience from SW/ Function development and/or testing within automotive development is meritorious. 

You bring experience within control technology, theoretically and from practical applications, are considered as an advantage within this role as well as from diagnostics concept development is considered as an advantage.

You are curious, structured, good analytical skills and a great technical interest. You have attention to details are important, but also having the ability to visualize the entire picture. 

You are fluent in English (written and spoken) as well as carry a valid driving license (B).

Who are we?Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent. We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Green Propulsion and Thermal Management are increasingly important areas for Volvo Cars to become leading in Electrification. Thermal Management have a key role in energy efficient propulsion by optimizing control towards customer functions and balancing attributes. The systems are getting more advanced and complex including different temperature levels, cooling down, heating up, transfer/transport and store heat for electric motors, battery, control modules etc. All this needs to be designed with sustainability in focus.

Thermal management is a part of the Energy department within the unit Propulsion & Energy. The section Thermal & Energy Management is divided into four groups, working closely together for a complete Thermal Management system delivery, both on HW and SW side. Our group, Thermal System & Function, have ownership of Thermal management from first architectural sketch, on HW and functional side, including concept design, to system development and ownership within our running programs. We are 12 persons with high ambitions, different ages, background and experience. We are characterized as an open and friendly group where everyone shares their knowledge with each other.

As an engineer working with Function Realisation and System Design you are a key person for total coordination of the electrical realization of Thermal Management functionality. You work in close cooperation with other technical areas, attributes and aspects. Within the department you will work in close cooperation with our Function owner, System architects, SW developers, CAE engineers and Component owners.

You will also:

• Lead the system design and implementation of Thermal Management functionality across departments
• Break down functional behavior to requirements for SW implementation, both within our department and to other technical areas if needed
• Lead the system design work with allocation of both software components, actuators and sensors
• Lead the System Safety work within the thermal area, ensuring functional safety fulfilment of the Thermal Management System. You will also participate / support in other work packages such as HARA, PRSP and similar work products lead by function / SW architect
• Participate in future development and improvement of our Thermal Management functionalities, documented in our Technical and Functional Roadmaps
• Participate in developing our Verification plan (AVN) on system- and complete vehicle level, regarding the function, both generic and per program

You have experience from functionality or software development best practices. To fit our diverse team, you need to be a team player that believes in inclusiveness. As a person you are structured, supportive and contribute with personal energy.

You would bring an University degree BSc or MSc within mechatronics, electrical or electronics as well as 5+ years working experience within relevant field. You bring experience from SW/ Function development and/or testing within automotive development is meritorious. 

You bring experience within control technology, theoretically and from practical applications, are considered as an advantage within this role as well as from diagnostics concept development is considered as an advantage.

You are curious, structured, good analytical skills and a great technical interest. You have attention to details are important, but also having the ability to visualize the entire picture. 

You are fluent in English (written and spoken) as well as carry a valid driving license (B).

Who are we?Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent. We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Green Propulsion and Thermal Management are increasingly important areas for Volvo Cars to become leading in Electrification. Thermal Management have a key role in energy efficient propulsion by optimizing control towards customer functions and balancing attributes. The systems are getting more advanced and complex including different temperature levels, cooling down, heating up, transfer/transport and store heat for electric motors, battery, control modules etc. All this needs to be designed with sustainability in focus.

Thermal management is a part of the Energy department within the unit Propulsion & Energy. The section Thermal & Energy Management is divided into four groups, working closely together for a complete Thermal Management system delivery, both on HW and SW side. Our group, Thermal System & Function, have ownership of Thermal management from first architectural sketch, on HW and functional side, including concept design, to system development and ownership within our running programs. We are 12 persons with high ambitions, different ages, background and experience. We are characterized as an open and friendly group where everyone shares their knowledge with each other.

As an engineer working with Function Realisation and System Design you are a key person for total coordination of the electrical realization of Thermal Management functionality. You work in close cooperation with other technical areas, attributes and aspects. Within the department you will work in close cooperation with our Function owner, System architects, SW developers, CAE engineers and Component owners.

You will also:

• Lead the system design and implementation of Thermal Management functionality across departments
• Break down functional behavior to requirements for SW implementation, both within our department and to other technical areas if needed
• Lead the system design work with allocation of both software components, actuators and sensors
• Lead the System Safety work within the thermal area, ensuring functional safety fulfilment of the Thermal Management System. You will also participate / support in other work packages such as HARA, PRSP and similar work products lead by function / SW architect
• Participate in future development and improvement of our Thermal Management functionalities, documented in our Technical and Functional Roadmaps
• Participate in developing our Verification plan (AVN) on system- and complete vehicle level, regarding the function, both generic and per program

You have experience from functionality or software development best practices. To fit our diverse team, you need to be a team player that believes in inclusiveness. As a person you are structured, supportive and contribute with personal energy.

You would bring an University degree BSc or MSc within mechatronics, electrical or electronics as well as 5+ years working experience within relevant field. You bring experience from SW/ Function development and/or testing within automotive development is meritorious. 

You bring experience within control technology, theoretically and from practical applications, are considered as an advantage within this role as well as from diagnostics concept development is considered as an advantage.

You are curious, structured, good analytical skills and a great technical interest. You have attention to details are important, but also having the ability to visualize the entire picture. 

You are fluent in English (written and spoken) as well as carry a valid driving license (B).

Who are we?Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent. We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Green Propulsion and Thermal Management are increasingly important areas for Volvo Cars to become leading in Electrification. Thermal Management have a key role in energy efficient propulsion by optimizing control towards customer functions and balancing attributes. The systems are getting more advanced and complex including different temperature levels, cooling down, heating up, transfer/transport and store heat for electric motors, battery, control modules etc. All this needs to be designed with sustainability in focus.

Thermal management is a part of the Energy department within the unit Propulsion & Energy. The section Thermal & Energy Management is divided into four groups, working closely together for a complete Thermal Management system delivery, both on HW and SW side. Our group, Thermal System & Function, have ownership of Thermal management from first architectural sketch, on HW and functional side, including concept design, to system development and ownership within our running programs. We are 12 persons with high ambitions, different ages, background and experience. We are characterized as an open and friendly group where everyone shares their knowledge with each other.

As an engineer working with Function Realisation and System Design you are a key person for total coordination of the electrical realization of Thermal Management functionality. You work in close cooperation with other technical areas, attributes and aspects. Within the department you will work in close cooperation with our Function owner, System architects, SW developers, CAE engineers and Component owners.

You will also:

• Lead the system design and implementation of Thermal Management functionality across departments
• Break down functional behavior to requirements for SW implementation, both within our department and to other technical areas if needed
• Lead the system design work with allocation of both software components, actuators and sensors
• Lead the System Safety work within the thermal area, ensuring functional safety fulfilment of the Thermal Management System. You will also participate / support in other work packages such as HARA, PRSP and similar work products lead by function / SW architect
• Participate in future development and improvement of our Thermal Management functionalities, documented in our Technical and Functional Roadmaps
• Participate in developing our Verification plan (AVN) on system- and complete vehicle level, regarding the function, both generic and per program

You have experience from functionality or software development best practices. To fit our diverse team, you need to be a team player that believes in inclusiveness. As a person you are structured, supportive and contribute with personal energy.

You would bring an University degree BSc or MSc within mechatronics, electrical or electronics as well as 5+ years working experience within relevant field. You bring experience from SW/ Function development and/or testing within automotive development is meritorious. 

You bring experience within control technology, theoretically and from practical applications, are considered as an advantage within this role as well as from diagnostics concept development is considered as an advantage.

You are curious, structured, good analytical skills and a great technical interest. You have attention to details are important, but also having the ability to visualize the entire picture. 

You are fluent in English (written and spoken) as well as carry a valid driving license (B).

Who are we?Volvo Cars is a company on a mission; to bring traditional car manufacturing into a connected, sustainable and smart future.Since 1927, we have been a brand known for our commitment to safety, creating innovative cars that make life less complicated for our consumers. In 2010, we decided to transform our business, resulting in a totally new generation of cars and technologies, as well as steady growth and record sales. Today, we’re expanding our global footprint in Europe, China and the US, and we’re on the lookout for new talent. We are constantly pushing our own skills and abilities to drive change in the automobile industry like never before. We are looking for innovative, committed people to join us in this endeavour and create safe, sustainable and connected cars. We believe in the power of people and will challenge and support you to reach your full potential. Join us and be part of Volvo Cars’ journey into the future.

Green Propulsion and Thermal Management are increasingly important areas for Volvo Cars to become leading in Electrification. Thermal Management have a key role in energy efficient propulsion by optimizing control towards customer functions and balancing attributes. The systems are getting more advanced and complex including different temperature levels, cooling down, heating up, transfer/transport and store heat for electric motors, battery, control modules etc. All this needs to be designed with sustainability in focus.

Thermal management is a part of the Energy department within the unit Propulsion & Energy. The section Thermal & Energy Management is divided into four groups, working closely together for a complete Thermal Management system delivery, both on HW and SW side. Our group, Thermal System & Function, have ownership of Thermal management from first architectural sketch, on HW and functional side, including concept design, to system development and ownership within our running programs. We are 12 persons with high ambitions, different ages, background and experience. We are characterized as an open and friendly group where everyone shares their knowledge with each other.

As an engineer working with Function Realisation and System Design you are a key person for total coordination of the electrical realization of Thermal Management functionality. You work in close cooperation with other technical areas, attributes and aspects. Within the department you will work in close cooperation with our Function owner, System architects, SW developers, CAE engineers and Component owners.

You will also:

• Lead the system design and implementation of Thermal Management functionality across departments
• Break down functional behavior to requirements for SW implementation, both within our department and to other technical areas if needed
• Lead the system design work with allocation of both software components, actuators and sensors
• Lead the System Safety work within the thermal area, ensuring functional safety fulfilment of the Thermal Management System. You will also participate / support in other work packages such as HARA, PRSP and similar work products lead by function / SW architect
• Participate in future development and improvement of our Thermal Management functionalities, documented in our Technical and Functional Roadmaps
• Participate in developing our Verification plan (AVN) on system- and complete vehicle level, regarding the function, both generic and per program

You have experience from functionality or software development best practices. To fit our diverse team, you need to be a team player that believes in inclusiveness. As a person you are structured, supportive and contribute with personal energy.

You would bring an University degree BSc or MSc within mechatronics, electrical or electronics as well as 5+ years working experience within relevant field. You bring experience from SW/ Function development and/or testing within automotive development is meritorious. 

You bring experience within control technology, theoretically and from practical applications, are considered as an advantage within this role as well as from diagnostics concept development is considered as an advantage.

You are curious, structured, good analytical skills and a great technical interest. You have attention to details are important, but also having the ability to visualize the entire picture. 

You are fluent in English (written and spoken) as well as carry a valid driving license (B).